PoE+ IP Compliant IP Dual Sided LED Display With Loudspeakers and Flasher

  • PoE enabled
  • G.729 Capable
  • G.711 Capable
  • Network Ready
  • GCK Optimized
  • InformaCast Compatible
  • SA-Announce Compatible
  • Flasher Included
  • LED Display Included
  • Powered

    Model IPDSC-DSE+ is an indoor dual sided display incorporating loudspeakers and LED flasher. It can display time as well as scrolling text and leverages the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

    AtlasIED IPDSC-DSE+ registers as a communication endpoint directly within InformaCast, SA-Announce, and GCK advanced notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements & intercom, while leveraging the WAN/LAN network architecture.

    When used within a Cisco Environment, these same IP dual sided LED displays with loudspeakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

    When receiving an emergency notification, the flasher on the IPDSC-DSE+ becomes active and blinks. When the emergency notification is complete, the IPDSC-DSE+ flasher stops blinking.

    In addition to visual signaling, the IPDSC-DSE+ can provide audio via its integrated loudspeakers or to support distributed analog public address systems with the convenience of line level audio outputs. This line level output is ideal for use with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED loudspeakers or paging horn loudspeakers.

    It also includes 2 GPI inputs, 1 GPI output, and microphone input for talk back or listen applications. The GPI/O ports offer triggering for critical alert notification or unified connectivity of third party systems.

    Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED IPDSC-DSE+ is an indoor dual sided display incorporating loudspeakers and flasher provides effective communication for all individuals.

    Network Controlled, High Visibility Red LED Display
    Auto Registration and Auto Provisioning
    16 x 64 LED Dot Matrix Display
    Multicast Enabled Network Clock Control
    Cisco SRST compliant
    Power Using IEEE802.3af Compliant PoE Switch or Local 12VDC-18VDC PSU
    RJ-45 Female Input on PCB
    Width 19.94 (506.5mm)
    Height 9.9" (251mm)
    Depth 7" (177mm)
    Data Sheet
    IPDSC-DSE+ Data Sheet (6 pages)
    CAD Drawing
    Revit Drawing
    IPDSC-DSE+ Revit Drawing