PoE+ Indoor Wall / Ceiling Mount IP Loudspeaker System

I8S+
  • Enclosure Sold Separately
  • CETL
  • G.729 Capable
  • Network Ready
  • PoE Enabled
  • One Cable Installation
  • G.711 Capable
  • GCK Optimized
  • InformaCast Compatible
  • SA-Announce Compatible
  • Powered

    AtlasIED I8S+ is an indoor wall / ceiling mount IP loudspeaker. It leverages the VoIP communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large loudspeakers with high output to overcome high ambient noise areas or large spaces.

    AtlasIED I8S+ registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture. 

    When used within a Cisco Environment, these same IP loudspeakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

    Where 3rd party notification applications are not required, the I8S+ loudspeakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications.

    Ideal for Corporate Applications, Education Institutions, Entertainment Complexes, Industrial Facilities, Government Buildings, Healthcare Facilities, Houses of Worship, Transportation Hubs - anywhere critical alerts / public address needs exist, and prefer using a single enterprise-class communications platform.

    Features

    I8S+ Indoor loudspeakers are fitted with the AtlasIED industry standard C10A loudspeaker, a dual cone 8" (205mm) loudspeaker with a 10oz (260g) ceramic magnet that is optimized for voice intelligibility.

    The Grills for the I8S+ IP loudspeakers are made of 18-gauge metal construction that provides security and durability in commercial applications. The baffle is finished in neutral white electrostatic powder coat and is packaged with all necessary mounting screws.

    All Atlas IP loudspeakers consists of a factory assembled loudspeaker, grill, and PCB amp/control board that is securely mounted to the rear of the grill.

    The I8S+ features include Auto-provisioning and auto-registration. This is an easy and time-saving way to configure our IP loudspeakers on your Voice VLAN, similar to a VoIP handset. By sitting on the same VLAN, both VoIP phones and IP loudspeakers share the same Quality of Service (QoS) so communications are always secure and guaranteed

    Includes GPI/O ports offer trigger for critical alert notification, or unified connectivity of third party systems.

    Mounting hardware options (sold separately

    • Wall – Flush (In-Wall): FEST-I8S
    • Wall – Surface (On-Wall): SEST-I8S
    • Wall – Angled (On-Wall): SEA-I8S
    • Ceiling – Tile Support and Enclosure: I8S-TBE
    • Ceiling – Tile Support Only: I8S-TB
    FEATURES
    Network Features
    Dynamic or Static IP Address
    IEEE802.3 10/100Base-T Ethernet
    IEEE 802.1q Tagging
    IEEE 802.11AT Compliant
    VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.729 Wideband Audio (64 kbit/s)
    Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
    Auto Registration: SLP for InformaCast or DHCP Option 72 for SA-Announce or GCK
    Static Configuration: HTTP GUI for Static Configuration or Cisco SRST
    Audio Features
    Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
    Aux Audio Line-In Unbalanced (2.8Vpp 10K)
    Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
    Additional Features
    2 General Purpose Inputs
    1 General Purpose Output (2A @ 30 VDC)
    Phone/Night Loud Ringer
    External Power Supply Option
    SPECIFICATIONS
    Connector Type RJ-45
    Height 11-1/2" (29.21 cm)
    Depth 4-1/4" (10.6934 cm)
    Shipping Weight 5.50 lbs (2.49 kgs)
    Safety Listed 60950-1
    SUPPORT FILES
    Installation Sheet
    I8S+ Data Sheet (9 pages)
    Installation Sheet
    Installation Sheet (4 pages)
    CAD Drawing
    I8S+ & I8SM+
    Software/Firmware
    Firmware change log
    Revit Drawing
    I8S+ Revit Drawing
    Software/Firmware
    Firmware version 12.16.3-7
    Software/Firmware
    Firmware version 12.18.01
    Software/Firmware
    Firmware version 12.20.00
    Software/Firmware
    Firmware version 12.21.03