AtlasIED I128SYSM+ 1’ x 2’ suspended ceiling mount IP loudspeakers with talkback leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large loudspeakers with high output to overcome high ambient noise areas or large spaces.
AtlasIED I128SYSM+ registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements, & intercom, while leveraging the WAN/LAN Network Architecture.
When used within a Cisco Environment, these same IP loudspeakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Where 3rd party notification applications are not required, the I128SYSM+ loudspeakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications and two-way communication.
Ideal for Corporate Applications, Education Institutions, Entertainment Complexes, Industrial Facilities, Government Buildings, Healthcare Facilities, Houses of Worship, Transportation Hubs - anywhere critical alerts / public address needs exist, and prefer using a single enterprise-class communications platform.
I128SYSM+ indoor loudspeakers are fitted with a dual cone 8" (205mm) loudspeaker that is optimized for voice intelligibility.
The Grills for the I128SYSM+ IP loudspeakers are made of 18-gauge metal construction that provides security and durability in commercial applications. A perforated 22-gauge metal screen is provided over the loudspeaker to maximize performance by allowing the optimum percentage of open area forward of the loudspeaker. The baffle is finished in neutral white electrostatic powder coat.
I128SYSM+ includes an Omni directional subminiature, electret condenser microphone that is mounted behind the Grill’s steel perforation material adjacent to the loudspeaker to allow two-way communication and/or monitoring from the loudspeaker location to any PC or phone handset.
All Atlas IP loudspeakers consist of a factory assembled loudspeaker, grill, and PCB amp/control board that is securely mounted to the rear of the grill.
The I128SYSM+ features include auto-provisioning and auto-registration. This is an easy and timesaving way to configure our IP loudspeakers on your Voice VLAN, similar to a VoIP handset. By sitting on the same VLAN, both VoIP phones and IP loudspeakers share the same Quality of Service (QoS) so communications are always secure and guaranteed
Includes GPI/O ports offer trigger for critical alert notification, or unified connectivity of third party systems.
Enclosure and baffle are pre-assembled and includes mounting hardware
Dynamic or Static IP Address
IEEE802.3 10/100Base-T Ethernet
IEEE 802.1q Tagging
IEEE 802.11AT Compliant
VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.729 Wideband Audio (64 kbit/s)
Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
Auto Registration: SLP for InformaCast or DHCP Option 72 for SA-Announce or GCK
Static Configuration: HTTP GUI for Static Configuration or Cisco SRST
Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
Aux Audio Line-In Unbalanced (2.8Vpp 10K)
Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
2 General Purpose Inputs
1 General Purpose Output (2A @ 30 VDC)
Phone/Night Loud Ringer
External Power Supply Option