1' x 2' IP Speaker System for Suspended Ceiling Systems

  • UL Listed
  • CETL
  • CUL
  • ETL

    Model I128SYS IP loudspeaker from AtlasIED consists of a factory assembled loudspeaker, baffle, tile support, enclosure system with PCB amp/control board securely mounted to the rear of the loudspeaker via concealed weld studs.

    The amp / control board is capable of producing 9 Watts RMS into the 8 Ohm loudspeaker with 9VDC minimum power provided by IEEE 802.3 AF compliant POE switches. (local 12-18VDC PSUs may also be used instead of POE switches). Interconnection is via a board mounted female RJ-45 connector.

    The industry standard C10A loudspeaker used in the I128SYS is a dual cone 8" (205mm) loudspeaker with a 10oz (260g) ceramic magnet. It includes a curvelinear paper cone for lower harmonic distortion. The loudspeaker is also equipped with a full 1" (25mm) diameter copper voice coil with aluminum former for better heat dissipation.

    The 18-gauge construction of the metal baffle provides security and durability in commercial applications. The baffle is finished in neutral white electrostatic powder coat and is packaged with all necessary mounting screws.

    Use with ControlKom® or InformaCast® software to send live, prerecorded or ad hoc messages along with control data to Atlas Sound IP Speaker and zone controller end points over new or existing multicast enabled local area networks.
    Highly Efficient 10 oz Dual Cone Loudspeaker System Provides 94 dB Average SPL @ 1W/1m and is Capable of 103 dB @ 1 Meter via the Rated Power of the Internal IP Addressable Amplifier
    Use with Berbee InformaCast® software, Cisco® POE networks & Cisco® IP Telephones to create extremely versatile paging and messaging systems
    Wide Frequency Response of 86Hz - 8kHz is Perfect for Speech and General Messaging Playback
    105° Dispersion in the 2kHz Octave Band (-6 dB)
    ETL Certified, Safety Listed to UL60950-1
    Tech Specs
    Connector Type RJ-45
    Sensitivity 94dB
    Safety Listed 60950-1, 2043
    Height 23.67" (601mm)
    Width 11.94" (303mm)
    Dispersion 105°
    Depth 4.89" (124mm)
    Shipping Weight 12.80 lbs (5.81 kgs)
    Support Files
    Data Sheet I128SYS Data Sheet (2 pages) View | Download
    CAD Drawing I128SYS Download