5400 VOICE ALARM SERIES AMPLIFIERS (EN 54-16)

5400 VOICE ALARM SERIES AMPLIFIERS (EN 54-16)
  • Dante enabled
  • PoE enabled
  • GCK optimized
  • Network Ready
  • EN54-16 Certified
  • Fault Reporting

    5400 series amplifiers from IED deliver unparalleled dependability and seamless switching between AC Power and 24 VDC in the event of a loss of mains power without diminishing performance or reduction of output power.  Specifically designed for voice evacuation, public announcements and background music (BGM) with uncompromising audio performance in accordance with the most stringent safety regulations (EN 54-16).

    The 5400AMP Series offers four models featuring either four channels of 500 watt, 300 watt, or 100 watt continuous amplification per channel. The amplifier is Class D switching mode which provides benefits such as: higher efficiency, increased reliability, improved performance, and lower operating cost. Switching mode operation combined with high voltage power devices make it possible to eliminate the heavy, costly, bulky transformers used by some amplifiers to drive 100V distributed loudspeaker lines.

    The amplifier is internally monitored and limited to prevent over-current and over-temperature conditions, also protecting the amplifiers from harm due to short circuits on the loudspeaker lines. The 100V floating direct outputs reduce more than just the weight: Installation and rack prices will drop significantly. The cost for energy consumption will average at roughly one third of any ordinary amplifier.

    In addition to mains power, a 24VDC power input is provided in the event of power loss which will automatically switch to 24V battery power – without any loss of output power. The amplifiers are typically paired with a 5404DZM or 5432DZM for EN54-16 compliant systems. The mainframe requires two (2) rack units (3.5”) of vertical space in a 19” equipment rack/cabinet. All cooling is front to back.

    Available Models:

    • 5454AMP - 500 Watts x 4 Channels
    • 5434AMP - 300 Watts x 4 Channels
    • 5414AMP - 100 Watts x 4 Channels
    FEATURES
    High Efficiency Class D Topology
    Discrete build of power amp modules
    100 Volts Direct Output (Without a Transformer)
    24VDC Backup Power
    High power, high efficiency Switched-Mode Power Supply (SMPS) with Power Factor Correction (PFC)
    Protection circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter
    External Remote Power On/Off Control
    Temperature Controlled, Variable Speed, Low Noise Fans
    High Tech Surface Mounting Technology (SMT) Design
    Four Amplifier Output Channels